Causes and Solutions for Weld Lines in Injection Molded Products Introduction to Weld Lines Weld lines not only

How to Solve the Color Variation and Black Spots in Transparent Products? Regarding the issue of color variation

Factors Affecting the Service Life of the Injection Molding Machine’s Plasticizing System What is the Plasticizing System of

Technical Requirements for Mold Venting In the manufacturing of molds, proper mold venting is a crucial aspect. Mold

Classification of Molds 1. Various Classifications of Molds 1.1 Classified by Hardness: Soft Mold, Hard Mold (Quenching Treatment)

Advantages and Disadvantages of Injection Molding Process Injection molding is the most commonly used process for manufacturing plastic

Characteristics of Thermosetting BMC Plastics Introduction to BMC Plastics Bulk Molding Compound (BMC) plastics are bulk molding materials

How to Solve the Issue of Burn Marks on Injection-Molded Parts? Injection Molds often experience burn marks during

How to Modify Mold Cavity Dimensions? If the produced product dimensions deviate, it means there is an issue

Injection Molding Process for Polypropylene An Overview of the Injection Molding Process for Polypropylene Polypropylene, commonly known as

Injection Molding Pre-Molding Actions and Back Pressure Control Selection of Pre-Molding Actions Depending on whether the nozzle retracts

Impacts of Poor Mold Venting During Injection Molding Factors Leading to Gas Formation in Injection Molds Gas formation

How to Design the Draft Angle of Plastic Products? Ways to design the draft angle of plastic products

The Application and Process of Gas-Assisted Injection Molding Technology 1. Principles of Gas-Assisted Injection Molding The use of

Injection Molding of Thin-Walled Plastic Parts Definition of Thin-Wall Injection Molding Technology Thin-Wall Injection Molding Technology, also known

Injection Molding Shutdown Regulations In daily production, injection molding machine shutdowns occur from time to time, including short

Techniques for Adjusting the Injection Speed The Close Relationship Between Injection Speed and Product Quality Makes It a

How to Address Floating Fiber in Glass Fiber Reinforced Nylon? Adding glass fibers and toughening agents as fillers

The Mold Cavity Venting Methods The thinner the wall of the product, and the farther it is from

Characteristics and Advantages of Various Composite Injection Molding Techniques Multi-component injection molding has opened up new possibilities in

What Are Necessary for Injection Mold Design? 1. Design Basis (1) Dimensional accuracy and correctness of relevant dimensions

The Internal Stress of Injection Molded Products There are many reasons for the generation of internal stress, such

How to Maintain an Injection Molding Machine? Maintenance of injection molding machines is crucial in hot weather! To ensure

Product Issues and Solutions During Injection Mold Testing 1. Main Runner Adhesion ① Polish the main runner  →  ②

The Importance of Setting the Appropriate Mold Temperature In the injection molding industry, it’s common for newcomers to

Causes and Solutions for Poor Gate Cutting 1. What is poor gate cutting? Poor gate cutting refers to

How to Solve the Deformation in Flat Injection-molded Parts? Large flat injection-molded parts have a significant area, resulting

How to Effectively Control the Temperature of Injection Molding Machine Barrel? About the temperature control of the injection molding

108 Wrong Injection Molding Operations That Must Be Eliminated 1. Increase the temperature of the baking material when

How to Solve the Splay Mark of PC Transparent Cup? Case: injection splay mark A small home appliance assembly

6 Aspects of Scientific Injection Molding First of all, let’s understand the characteristics of injection molding plastics, so

Causes of Damage to the Injection Molding Machine Hydraulic Pump The pump is the “heart” of any hydraulic system.

Ways to Improve Production Efficiency of Injection Molding Injection molding factories want to become bigger and stronger, and

How to Adjust Low Pressure Mold Clamping? If there is a loud sound of mold opening and clamping

How to Improve the Life of Injection Mold? Mold life has always been an important factor affecting the

How Injection Molding Plants Improve Productivity？ The hard indicator of management assessment is productivity ◆ Productivity = machine utilization

Useful Tips for Adjusting Injection Molding Speed and Pressure The pressure speed is linearly proportional, but many people

Professional Injection Molding Machine Adjustment Process 1. Purpose Standardize machine operation, facilitate production, protect molds and equipment, and ensure

Injection Molding Machine Nozzle and Cylinder In this post, we will talk about the working principle and characteristics of

Scientific Setting of Switching Point, Holding Time and Pressure for Injection Molding In the process of injection molding

Two Factors Affecting Injection Molding Shrinkage and Solution There are 2 main factors affecting the injection molding shrinkage: One

Injection Molding Machine Operation Specification for Changing Plastic or Color Every production part of the injection molding  machine

Factors Affecting the Positioning Accuracy of Injection Molding Machine Manipulator Now many machinery manufacturers use injection molding machine manipulators

About Injection Molding Machine Screw This post introduces all the issues about the injection molding machine screw including

Injection Molding Machine Development History in China It has been half a century since the initial injection molding

How to Determine the Optimum Clamping Force? – 3 ways The optimum clamping force can be set at